SOLIDS

            Modular size: 7 5/8 x 3 3/8 x 2 ¼

            Queen size:    8 x 2 7/8 x 2 ¾

Solids should be used in any location where the holes or the brick side will be seen, for example, windows and stairs. Do not allow your brick mason to fill the brick holes with mortar or use a brick solid that does not match the color of the other brick. We offer solids to match all of our brick colors.

To use any solid units as pavers is fine; however, they will require a mortar joint or bond.

 

DRY SET PAVERS

            Size: 7 5/8 x 3 13/16 x 2 ¼

This dry set size paver allows you to use or not use a mortar joint. This size will course out like a 4 x 8.

 

Pavers are available in Red; Full Range; Flashed; Straight Edge and Chamfered Edge. Antebellum pavers are tumbled to create an “old” or “used” appearance. Chamfered edge means that we have rolled the edges down. This prevents chipping and creates a softer appearance.

 

You now have the freedom to use a traditional mortar bond or a do-it-yourself project by using a sweeping sand method. Sweeping sand method is just what it sounds like. Once you have prepared the area where pavers are to go, simply lay the pavers in the pattern you have chosen. Then, scatter dry concrete mixed with sand over the pavers. It will probably take more than one application. Your patio or pathway is ready for immediate use even after one sweeping.